Firmware Strawberry ST288 Venturer SPD SC7731 Latest Update 2019

Free Download official Firmware Strawberry ST288 venturer SPD SC7731 for unbrick dead after flash or repair Stuck on Logo.
Flash Strawberry ST288 SPD SC7731 using ResearchDownload, UpgradeDownload or other SPD Tools.
Model Name  : c177_ctk_231
Model Brand : ST288
Model Device: c177_ctk_231
AndrVersion : 6.0
BaseBand CPU: C177_CTK_231
Project Ver : MRA58K release-keys
Model Ext   : ST288
ST288_ctk_231_6.0_MRA58K_release-keys.pac
type: ROM size: 634MB
md5: 5a14e3b8020d225bc11260b8bc2c14a0
AndroidFileHost Google Drive
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

Install ROM :
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract ST288_ctk_231_6.0_MRA58K_release-keys.pac.7z
2 Run UpgradeDownload or FactoryDownload or ResearchDownload
3 Click on "Load packet"and add the ST288_ctk_231_6.0_MRA58K_release-keys.pac
4 Click on "Start"
5 Press and Hold Volume Up and connect your android device to the computer
6 Flasing will run and wait until the process is complete
7 Finish