Flash Official Stock ROM / Firmware on Samsung GALAXY CORE II With ODIN Terbaru 2019

Flash Official Stock ROM / Firmware on Samsung GALAXY CORE II With ODIN.

Flash Stock ROM Samsung GALAXY CORE II. This tool also is referred to as Samsung Galaxy Core II Dual SIM G355H, Samsung Galaxy Core 2 Dual SIM. On this put up we are able to give an explanation for how to Flash Official Stock ROM / Firmware on Samsung GALAXY CORE II, If you have the bricked / boot loop / Stuck device, you can comply with this manual to restore it. This approach also pressured your Samsung device to the manufacturing unit settings. Make positive you realize all danger prompted due flashing your Samsung GALAXY CORE II device. If now not yet, we endorse you to apply Samsung’s very own utilities OTA (Over-the-air) or Samsung Kies to upgrade your Samsung tool.
Samsung GALAXY CORE II released on 2014, June. Samsung GALAXY CORE II is the smartphone with 4,5 Inches TFT capacitive touchscreen, 16M colorations, paintings on Android OS, v4.4.2 (KitKat), Powered with the aid of 1.2 GHz CPU, blended with 768 MB of RAM and 5 MP of  Primary camera and VGA on secondary digicam. 

Prerequisite.

Download all following files beneath to begin flash Firmware for your Samsung GALAXY CORE II.

1. Make positive your Samsung GALAXY CORE II is fully charged. Or minimum has 99% of battery ability. It will avoid the flashing failure process.
2. Flashing method will delete or wipe all facts saved in internal memory. So, consider to backup all records before flashing device.
3. Make sure you have got set up a modern day of the Samsung driving force, that assist with your tool If you do not have, you could down load Here.
4. Original USB cable driving force on your Samsung GALAXY CORE II.
5. Download Odin V3.11.1, Here
6. Firmware Download. (use one of the 3 strategies underneath to down load Samsung Firmware)

• One. Download Official firmware file for the model quantity of your device, down load it from - SamMobile.com, or you can go to the opposite website, samsung-updates.com. 
• Two. Use this guide below to download Samsung Stock.  Here
• Three. Firmware Samsung GALAXY CORE II, you need to Log In to download firmware thru this hyperlink.
  • SM-G3556D - China (China Unicom) - Here
  • SM-G355M -  Uruguay, Panama, Trinidad, Tobago, Colombia, Guatemala, South America, Argentina, Brazil, Chile, Paraguay, Mexico, Peru - Here
    

Guide To Flash Samsung GALAXY CORE II 

1. Download all prerequisite report above
2. Then, installation all motive force in your pc or PC.
3. Extract Odin V3.11.1. File within the vacation spot folder.
4. Switch Off your Samsung GALAXY CORE II to start flashing technique.
5. Then, run Odin3 v3.11.1 through proper click on on Odin.exe and pick Run as Administrator.Flash Stock Firmware On Samsung GALAXY CORE II
6. When the program is jogging, now you can click on AP, and navigate to the *.tar or *.tar.md5 firmware document. 

   Flash Stock Firmware On Samsung GALAXY CORE II

7. Now your firmware document has been inserted in Odin3 

   Flash Stock Firmware On Samsung GALAXY CORE II

8. Then, Enter download mode your Samsung GALAXY CORE II. See this guide how to do it.
9. On this mode, now connect your Samsung GALAXY CORE II to your PC / computer the use of a USB cable. 
10. After your phone related, you will see a message seem that show your tool brought and there's information at the ID: COM at top left nook. Keep in mind for this COM vary relying on the PC / Laptop. Just Ignore all, on this image you will see that your device is detected on (COM 5)

    Port Com Samsung GALAXY CORE II

11. Make certain re-partition is NOT ticked
12. When the entirety already you could click the Start Button. at the lowest left corner
13. Just watch for the technique to run for approximately 2-5 minutes, and ensure there's no interference on this technique. 
14. When entire it'll show a notification PASS and your smartphone Samsung GALAXY CORE II will mechanically restart.
15. Wait on your device in addition up, it will take some time.
16. When your Samsung GALAXY CORE II is geared up to use, now check your firmware model. See this guide how to test it.
17. Finish.