Guide How to Flash Firmware on Motorola RAZR D1 With RSD Lite Terbaru 2019

Guide How to Flash Firmware on Motorola RAZR D1 With RSD Lite.

Flash Firmware on Motorola RAZR D1. Right here we'd provide an explanation for to you a way to flash or installation a new firmware onto Motorola RAZR D1 using RSD Lite flash device. RSD or Remote Software Download is a Motorola tool that enables us to flash a firmware. Use this guide to restoration a bricked or bootloop Motorola RAZR D1 tool. Or you can use this manual to update Motorola RAZR D1 tool this is now not getting Operating System updates direct (Over the Air) from the smartphone manufacturer. Simply simply download a firmware and the others tool from the to be had link below. Then keep it on your local pc or pc.

To proceed with this manual you ought to realize about this Motorola RAZR D1 variations ;

• Motorola RAZR D1 XT914 (LATAM), 
• Motorola RAZR D1 XT915 (Single SIM), 
• Motorola RAZR D1 XT916 (Dual SIM), 
• Motorola RAZR D1 XT918 (Dual SIM, TV)

This tool is released in 2013, March. With 3.5 inches TFT touchscreen. Powered by 1.0 GHz Cortex-A9 CPU, Mediatek MT6575M chipset, PowerVR SGX531 GPU, Supported via 1 GB internal reminiscence, 5 MP number one digital camera, no secondary camera. And run on Android OS, v4.1 (Jelly Bean), upgradable to v4.4.2 (KitKat).

Let's we start our manual below

no 1 Step.

1. To avoid your data and record stored on  Motorola RAZR D1 lose during the flashing system, attempt to lower back up it first 
2. Try to preserve your battery energy at 80% of completely charged.
3. For satisfactory suggestions, we suggest the use of an authentic USB cable to attach your Motorola RAZR D1 to the laptop.
4. Make positive driver for Motorola RAZR D1 hooked up effectively if you do not have the motive force but please down load thru this link below.
5. Download and installation RSD Lite Multi flash to the pc or laptop. Here
6. Here you can download Motorola RAZR D1 firmware record. (choose appropriate document in step with your phone variations)

• Motorola RAZR D1 XT914 (LATAM) Here 
• Motorola RAZR D1 XT915 (Single SIM) Here 
• Motorola RAZR D1 XT916 (Dual SIM) Here 
• Motorola RAZR D1 XT918 (Dual SIM, TV) Here 

#2. Flashing Motorola RAZR D1.

1. Now, boot Motorola RAZR D1 tool to bootloader mode. How to do it?

• Power off the Motorola RAZR D1, via press and hold energy button for a seconds, it'll absolutely turn off the tool.
• Now, press and preserve both volume down + quantity up button.

Now, connect your Motorola RAZR D1 to the pc through USB cable.make certain your Motorola RAZR D1 efficiently detected in your laptop through bootloader mode.if failed, attempt to use authentic USB cable or trade your laptop port.then, Open your RSD Lite software in your pc from start menu.

rsd lite flash tool

Click the button assigned with purple circle display on the picture above to load Motorola RAZR D1 firmware.firmware document need to have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)Once your Motorola RAZR D1 firmware correctly loads, RSD lite flash tool have to look like the picture proven under.

rsd lite

Now click on the start button. To start the flashing method.flashing system will begin routinely without your interference.just wait some time till flashing your Motorola RAZR D1 performed.

Don't Miss it!

• How To Update Firmware On Motorola Router
• How To Update Firmware On Motorola Surfboard Modem
• How To Update Firmware On Motorola Surfboard Sbg6580
• How To Update Firmware On Motorola Cable Modem Sb6141
• How To Update Firmware On Motorola Mg7550
• How To Update Firmware On Motorola Cable Modem Sb6121
• How To Update Firmware On Motorola Sbg6782-ac
• How To Update Firmware On Motorola Mg7540
• How To Update Firmware On Motorola Surfboard Sb6141
• How To Update Firmware On Motorola Baby Monitor