[Guide] How to Install TWRP Recovery and Root Android Lenovo Vibe K5 K5 Plus.
Install TWRP Recovery and Root Vibe Lenovo K5. This manual will show you a way to Install TWRP Recovery and Root Android Lenovo Vibe K5 K5 Plus. If you want to root the Lenovo Vibe K5 or K5 plus you should set up TWRP Recovery first in this tool. We recognise that TWRP is a custom recovery photo for Android-based totally devices, and this recovery furnished GUI interface or with touchscreen enabled, by way of the usage of TWRP we permit customers to put in 0.33-celebration firmware and backup the modern system. consequently, TWRP often hooked up whilst rooting Android telephone devices.
Lenovo Vibe K5 is the phone launched in February 2016. With 5,0 Inch IPS capacitive touchscreen, 16M colorings, work on Android OS, v5.1 (Lollipop), and supported with Quad-center 1.5 GHz Cortex-A53 & Quad-middle 1.2 GHz Cortex-A53 CPU, Qualcomm MSM8929 Snapdragon 415 chipset, Adreno 405 GPU, blended with 2 GB of RAM, thirteen MP on number one digicam and 5 MP on secondary digicam.
Lenovo Vibe K5 is the phone launched in February 2016. With 5,0 Inch IPS capacitive touchscreen, 16M colorings, work on Android OS, v5.1 (Lollipop), and supported with Quad-center 1.5 GHz Cortex-A53 & Quad-middle 1.2 GHz Cortex-A53 CPU, Qualcomm MSM8929 Snapdragon 415 chipset, Adreno 405 GPU, blended with 2 GB of RAM, thirteen MP on number one digicam and 5 MP on secondary digicam.
Install TWRP on Lenovo Vibe K5.
Here is the manual started. Now follow all step carefully.
- Make certain Minimal ADB and fastboot installed on your laptop. You can see this guide.
- Make certain your battery is not empty or at least has 70% of battery capacity.
- Now, turn on your Lenovo Vibe K5.
- Then permit the Developer Options.
- Go to Setting -> About Phone -> Phone Information -> faucet 7 instances at Build Number,
- Go to Settings -> Developer -> USB Debugging
- Go to Settings -> Developer -> Unlock OEM
//force.google.com/document/d/0B2I5z1mFfUpcM0lHaHRsRTlsalk/view?Usp=sharing
//forum.xda-builders.com/devdb/mission/?Id=15529#downloads
Created by way of Shreps //discussion board.xda-builders.com/member.personal home page?U=4493088
TWRP version : 3.0.2.0Filename : twrp-k5-3.0.2-r1_shreps.imgopen a command spark off from inside your fastboot folder.to begin this command prompt just hold shift + proper click, pick open command spark off right here. Run ADB on computerNow type,- adb devices
- adb reboot bootloader
- fastboot boot TWRP-k5-3.0.2-r1_shreps.img
- fastboot flash restoration TWRP-k5-3.0.2-r1_shreps.img
Root on Lenovo Vibe K5.
- This step will show you the way to root Lenovo Vibe K5
- To start it, you ought to Download the ZIP file SuperSU v2.46
//download.chainfire.european/696/supersu/
Then shop it to the micro SD card.now turn off your Lenovo Vibe K5.Then input into recovery mode.- Press and keep Power Button and Volume Up button
Berikan Komentar
<i>KODE</i>
<em>KODE YANG LEBIH PANJANG</em>
Notify me
untuk mendapatkan notifikasi balasan komentar melalui Email.