Guide How to Use SP Flash Tool to Flash Android Mediatek Phone.
How to Use SP Flash Tool. This guide will display you the way to Use SP Flash Tool to Flash Android Mediatek Chipset Phone. You can use SP Flash tool to fixing intense instances of a bricked MTK Android, just like the telephone not coming on at all or not booting into recuperation mode and many others. So what do you need to start flashing your Android MTK phone the use of SP Flash Tool ?
Requirement using SP Flash Tool.
- SP Flash Tool Application, This software is typically already protected in the flash report. Or you may down load here.
//spflashtools.com/wp-content/uploads/SP_Flash_Tool_v5.1640_Win.zip
Mediatek Backup or File to be flashed or scatter report.A Laptop or PCMT65xx VCOM Drivers. You must manually deploy VCOM drivers on the PCUSB cableMediatek Android phone.
Step By Step Procedures.
- Switch off your android smartphone if it has non removable (built in) battery. Or just do away with battery from phone if this cellphone has detachable battery.
- Make positive there is a formatted SD card in the cellphone. If there is an SD card slot
- Then, Open SP Flash Tool software as an Administrator.
|
How to Use SP Flash Tool |
- Then click on Scatter Loading button on the right aspect.
|
How to Use SP Flash Tool |
- Then new pops up window (open scatter record) will open, in this window you can choose the scatter report on your cellphone model then click Open (scatter report is a text report with the phrase "scatter" in its name )
|
How to Use SP Flash Tool |
- You will see a list with ticked boxes seem in SP flash tool (preloader, mbr, uboot, bootimg,etc)
|
How to Use SP Flash Tool |
- Format Phone : You can skip this step, if you don't wish to layout
- Click Format tab
- After clicking Format, a dialogue container will pop up, make sure that 'Auto Format Flash' and 'Format entire flash without Bootloader' are decided on.
- Click OK, Stop must now be red or green in color
- Connect the switched off telephone (with battery inner) to the PC thru USB cord
- A development bar should load till you get a 'Success' message (inexperienced circle with OK)
- Disconnect the telephone from PC
Untick the box in front of any object you do no longer wish to flash, simply go away ticked on
recovery, and
android.How to Use SP Flash Tool To manually load an object that does not automatically get ticked after loading the scatter document, tick the container in front of that object then double-click its Location and select the corresponding record within the window that pops up.once all record you want ticked, now click on
Download. How to Use SP Flash Tool Stop button have to now be prominent while different options need to be grayed out.now it's time to attach your Android Mediatek Phone for your PC the use of USB Cable on Switch Off position. If you'd remove the battery you have to established on it. (for removable battery).now you may see a development bar begin going for walks at the bottom of
SP Flash Tool applications.
|
How to Use SP Flash Tool |
Just wait till you get a Success message, it is marked with green circle with OK.
|
success - How to Use SP Flash Tool |
Then, disconnect the Android Mediatek Phone, put off the battery for 15 seconds (if detachable), slot it again in then energy up the telephone. Make sure to do a manufacturing facility reset in recovery mode to clear any mistakes.finish, now you've got efficiently flash your Android Mediatek Phone using
SP Flash tool.
Berikan Komentar
<i>KODE</i>
<em>KODE YANG LEBIH PANJANG</em>
Notify me
untuk mendapatkan notifikasi balasan komentar melalui Email.