Guide Install TWRP 3.1.10 Huawei P8Lite By OpenKirin Terbaru 2019

Guide Install TWRP 3.1.1-0 Huawei P8Lite By OpenKirin.

TWRP Huawei P8Lite. If you need to install TWRP recovery on your Huawei P8Lite, try to read the subsequent guide. This is unofficial TWRP for inventory EMUI 4.X tool. This guide from the XDA thread surdu_petru, By putting in TWRP in your tool, you may installation the custom ROM. TWRP is one of the widest recovery used by Android phone consumer, as it is straightforward to apply and an easy-to-apprehend interface.

Why you ought to set up this TWRP version as compared the reliable model? Because, in case you want to repair EMUI firmware you do not need to wipe: /information/cust. and there are many extra blessings that you can get with the aid of installing TWRP OpenKirin.

Prerequisite.

1. Downl0ad TWRP OpenKirin (md5 : 29e1c65cf48803892946e858ebe950cf). Here
2. Make sure the Huawei P8Lite Bootloader is unlocked. See this guide to unlock Huawei bootloader.
3. Enable USB debugging in your cellphone.
4. D0wnl0ad ADB and fastboot from Here
5. Enable OEM unlock

Installation Guide.

1. Make certain your device is Huawei P8Lite with the intention to comply with this manual.
2. Make sure your Huawei P8Lite walking EMUI 4.X
3. Extract TWRP OpenKirin, now then put recovery.img right into a platform-equipment folder inside ADB folder.
4. Now, join your Huawei Honor P8Lite to the pc thru USB cable.
5. Run command prompt from the ADB fastboot folder, How to do it?

• From the empty area, proper-click the mouse and Hold down shift button.
• Now, select open command here

Then, from the command activate window type the following command.

• adb device

The command spark off must return your device ID serial variety. If so, you have effectively connected your telephone to the pc.once your Huawei P8Lite effectively linked, now type the subsequent command.

• adb reboot bootloader

Just look ahead to a 2d, your Huawei P8Lite will reboot into fastboot and rescue mode.once your device in the fastboot and rescue mode, it's time to flash TWRP 3.1.1-0 OpenKirin to your phone. Therefore you need to kind this command at set off and then press the input button

• fastboot flash recuperation recovery.img

Just wait for 2 or 3 seconds for the complete flashing manner.

How to Boot Huawei P8Lite into Recovery.

1. Make sure your tool is still related to the laptop whilst test the TWRP is working or now not.
2. From the command prompt kind the following command and press enter

• adb reboot recovery

Then, lower back on your smartphone and now it's going to input the recovery mode as shown within the image underneath.

enter TWRP healing mode

And now your tool will boot into TWRP restoration.

Finish