Guide to configuring Dynamic HP Smart Array B120i RAID support On HP Proliant ML10 V2 server Terbaru 2019

Guide to configuring Dynamic HP Smart Array B120i RAID assist On HP Proliant ML10 V2 server.

Configuring Dynamic HP Smart Array B120i RAID support. On this manual, we will display to you how to permit Dynamic HP Smart Array B120i RAID support on Proliant ML10 V2 server. This is a totally simple project you can do to installation this server. You can permit it by way of getting into the BIOS system on this server. For most HP ProLiant you could use the F9 key on the keyboard to go into Bios system. Now observe this manual cautiously.

Read this : How to  to put in Windows Server 2012 R2 working machine on HP Proliant ML10 V2 server.

Enabling Dynamic HP Smart Array B120i RAID.

1. Start your Proliant ML10 V2 server by way of pressing Power button positioned in the front of server body casing
2. Now, wait for the initializing procedure, it takes 2-3 minute.

   initializing method - ProLiant ml10 v2

3. When you see F9 on your screen, hit this button in your keyboard to go into Setup. F9 located at the left backside of your display screen.

   enter bios - ProLiant ml10 v2

4. Once you entering Setup on Proliant ML10 V2, now spotlight System Options. (navigate the use of up and down arrow keyboard button, and input to affirm your choice).

System alternatives  - Proliant ML10 V2

Then you will see next options, now spotlight SATA Controller options and hit input.

SATA Controller alternatives - ProLiant ml10 v2

Now, hit input to Enable Dynamic HP Smart Array B120i RAID Support.Enable Dynamic HP Smart Array B120i RAID Support.Then you will see a caution in your screen with red historical past and yellow text. Enabling RAID will result in facts loss or data corruption on current SATA drives. Please backup all drives before permitting this selection.

Enabling RAID will result in facts loss or data corruption on current SATA drives. Please backup all drives before permitting this selection.

On the next screen, you may see three options, Enable SATA legacy SupportEnable SATA AHCI Supportjust choose: Enable Dynamic HP Smart Array B120i RAID support by means of urgent enter

Enable Dynamic HP Smart Array B120i RAID support

Now back to domestic screen, then save and exit from HP Proliant ML10 V2 setup utility via urgent F10 button in your keyboard.

F10 store and exit from Proliant ML10 V2 setup

Finish, now you have efficaciously configuring Dynamic HP Smart Array B120i RAID assist On HP Proliant ML10 V2 server.