Guide To Flash Or Install Stock Firmware On Android Motorola Moto G (third Gen).
Install Stock Firmware On Android Motorola Moto G (third Gen). Guidebelajar on this manual will explain to you how to flashing android tool on Motorola Moto G (third Gen) with easy and easy step, Motorola Moto G (third Gen)comes with 5,0 Inches wides IPS LCD capacitive touchscreen, 16M colors, paintings on Android OS, v5.1.1 (Lollipop), deliberate improve to v6.0 (Marshmallow) and supported with rade to v6.0 (Marshmallow) Chipset chipset, Processor Quad-core 1.4 GHz Cortex-A53, GPU Adreno 306, blended with 2 GB of RAM as their engine. And you can revel in thrilling 13 MP on the main camera, and 5 MP on secondary camera. And this gadgets released 2014, November.
This is some reason why you have to flash or install a new firmware to your Motorola Moto G (third Gen)
- You can flash your Android tool if it gets a boot loop or whilst you didn't deploy Stock ROM Mod
- If you need to revert lower back to Stock Rom from any custom ROMs Like CM 12, Pac ROM, Resurrection remix, Slim Lp.
- If your android tool continues to be underneath guarantee, you can take it to a carrier center. Due to the fact you'll get low risk from harm or dysfunction of this tool and you may get a unfastened charge.
- If your tool is out of the warranty length, you may do that alternatives.
- If you are not experienced in android flash, the nice recommendation is to take your Android tool to an authentic service middle to get authentic flash ROM
- If you need to attempt it yourself, you could comply with this manual step by step To Flash Or Install Stock Firmware On Android Motorola Moto G (third Gen), however guidebelajar is now not answerable for all of the dangers thereafter.
Download Required File For Flash Motorola Moto G (third Gen).
Download all wanted file for flash Motorola Moto G (third Gen) below.
- This stock most effective paintings in this tool variant (XT1540 , XT1541 , XT1542 , XT1543 , XT1544 , XT1548 , XT1550 Motorola Moto G third generation)
- Included each for 1GB and 2 GB variations.
Guide To Flash Motorola Moto G (third Gen).
Now, follow this manual little by little to flash Motorola Moto G (third Gen)
- The first factor you want is to download the inventory firmware file for your Motorola Moto G (third Gen) from above.
- After finish down load, this record, extract zip for chosen Firmware Image to a folder with a simple directory shape.
Then, Extract the adb-fastboot-latest_win_linux.zip into this folder.
- For example: C:motog_firmware
Reboot Motorola Moto G (third Gen) into Bootloader Mode.
Now we proceed to reboot our Motorola Moto G (third Gen), there is two strategies we are able to use to reboot this device.
- Reboot Motorola Moto G (third Gen) using hardware button.
- Unplug the USB cable from the computer
- Then power off Motorola Moto G (third Gen) the smartphone.
- When your phone off, now press and keep 'Volume down button' then power on the smartphone.
- Finally, connect USB cable on your computer.
- First you want is permit developer mode at the Motorola Moto G (third Gen)
- Go to (Settings-> 'About Phone')
- Now, Tap 7 times on 'Build Number'
- How to Enable USB debugging. ?
- Go to Settings ->
- Developer options ->
- Then tap USB Debugging.
- Then, Connect telephone to pc via USB cable, you have to see a new ADB tool detected and drivers set up.
- Now, Open Command Prompt or Terminal, you could navigate to the Firmware / ADB folder
Then kind :
- For example: C:motog_firmware
- adb reboot-bootloader
Enter Fastboot Command to Flash Motorola Moto G (third Gen).
Now, we nonetheless on command spark off, then input instructions manually, separately then verify with press enter. And then checking that each one returns no blunders.
- fastboot flash partition gpt.bin
- fastboot flash bootloader bootloader.img
- fastboot flash emblem emblem.bin
- fastboot flash boot boot.img
- fastboot flash healing recovery.img
- fastboot flash gadget system.img_sparsechunk.0
- fastboot flash system machine.img_sparsechunk.1
- fastboot flash machine gadget.img_sparsechunk.2
- fastboot flash machine device.img_sparsechunk.3
- fastboot flash device device.img_sparsechunk.4
- fastboot flash gadget device.img_sparsechunk.5
- fastboot flash modem NON-HLOS.bin
- fastboot erase modemst1
- fastboot erase modemst2
- fastboot flash fsg fsg.mbn
- fastboot erase cache
- fastboot erase userdata
- fastboot reboot
Now, your Motorola Moto G (third Gen) will reboot, whilst prepared to use, your telephone is successfully hooked up new firmware. Finish.
Berikan Komentar
<i>KODE</i>
<em>KODE YANG LEBIH PANJANG</em>
Notify me
untuk mendapatkan notifikasi balasan komentar melalui Email.