Guide To Flash / Unbrick / Unroot LG G3 Terbaru 2019

Guide To Flash / Unbrick / Unroot LG G3.

Flash / Install Firmware LG G3. This LG G3 is the phone with 5,5 Inchi wide LCD, work on Android OS, v4.4.2 (KitKat), upgradable to v5.0 (Lollipop) and supported with chipset Qualcomm MSM8975AC Snapdragon 801, and CPU Quad-center 2.5 GHz Krait 400, GPU Adreno 330, mixed with 3 GB of RAM and thirteen MP on number one digital camera, 2,1 on secondary digicam.

Now, observe the preparation listing beneath, do it at your own risk.

flash LG G3

Requirement Tool For Flash LG G3.

Before you carry out flash or installation your firmware on LG G3, you have to download all requirement tool below ;

1. Download Firmware LG Official (format kdz)
   1. LG G3 LGD855P

• Check the firmware that matches along with your phone model, 
  • The V10 is the KitKat version
  • The V20 is for the Lollipop Version
  • And, you could see a letter, that is little updates, you may down load the only with the "last" letter.
• Download Driver LG: 
• Latest LG FlashTool:

Guide To Flash LG G3

Please comply with this guide cautiously to flash LG G3.

1. Make positive you have downloaded all requirement tool above
2. Then Install the drivers with your phone connected for your Computer, when it finished disconnecting your LG G3 cellphone from your computer.
3. Now flip your LG G3 phone off, then click on constantly on the up volume and join your telephone for your PC,
4. Now, enter your LG G3 into download mode. ( visit this guide )
5. Run LGFlashTool2014.exe, Never change all default desire, But, in case you need, you can follow this:
6. Select Type: CDMA
7. Phone Mode: CS_Emergency
8. Reset Time: 33000
9. On the Select KDZ record, choose the yellow coloration folder icon, and select the firmware file LG is already downloaded earlier
10. Klik CSE Flash.
11. You can pick out the language which can talk in your language.
12. For element little by little, you could follow this put up.

Video Guide.