Guide To Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.

Set Up TP-Link (TL-WA500G) As Wireless Access Point. When we need to share an Internet connection for the public, that every body on the blanketed vicinity may want to have a connection to get admission to the internet. We just need a Wireless Access Point. Wireless Access Point is a station that transmits and gets statistics. With this Access Point, we will connect all user or humans inside the network, And alsoWireless Access Point serves because the point of interconnection between the WLAN and a hard and fast twine connection at the community.

If you have bought a brand new Wireless Access Point, you ought to set it up earlier than you use to connect all person within the community. All person that connect to your Access Point ought to have an IP Address so they might talk with the other user. This is a very complicated once if you should set up one after the other a computer or consumer that connect to your personal community. To clear up a complex IP Address setup for each user, we have to use DHCP (Dynamic Host Configuration Protocol).

Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.

By the use of DHCP on your Wireless Access Point set up, you may get more an advantage.

There is not any need to manually configure every client with an IP cope with.

We do no longer need to preserve a record of the IP addresses that you have assigned.
We can robotically assign a new IP deal with in case you pass a customer to a exclusive subnet.
We can launch the IP address of a pc that is offline and reassigns the cope with to another pc.
Address duplication is removed as DHCP robotically tracks IP cope with assignments.
The DHCP server can discover unauthorized DHCP servers on the network.

And now comply with this guide cautiously to installation a Wireless Access Point on TP-LINK (TL-WA500G).

Guide To Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.

Make sure you have got linked TP-Link (TL-WA500G) in your laptop the usage of a community cable.
Make certain your Wireless Access Point is activate.
Now, Start your windows laptop, while ready observe this next guide.

Configure A Computer.

Now, we are able to configure our laptop to talk with the Wireless Access Point. The AP and computers in your community have to be within the identical IP Address range without overlap with every different. And it'll want a manually configure to your pc community.

Connect the local PCs to the LAN ports at the Wireless Access Point and configure the IP cope with manually in your computer.
Right click on the network icon tray. It positioned on the right bottom of your window.
network icon
Then click Open Network and sharing center.open community and sharing center
It will open a Network And Sharing middle window, now, click Change adapter settings.change adapter settings
Then on the brand new window, Right click on the Local Area Network icon and choose properties.Local Area Network
On the Local Area Connections Properties window proven beneath, highlight Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
Then you ought to input a range of to configure the IP Address manually.

Select Use the following IP address radio button.
Enter 192.168.1.X (x is any integer among 1 to 253) into the IP cope with. (on this manual we use Ip Address 192.168.1.2 for an example.
filed, 255.255.255.0 into the Subnet mask
filed and 192.168.1.254 into the Default gateway filed.
filled IP Address Number on Internet protocol model 4
Click Ok to hold your settings.

Now, Verify the community connection between your pc and the Access Point through the Ping command. The following instance is in Windows Seven Operating System.

Press and preserve Windows button at the keyboard whilst press R to open Run command.
Now Enter cmd in the filed and click on Ok.
Type ping 192.168.1.254 at the screen that displays after which press Enter.

If the result displayed is much like that proven in Figure under, the connection between your PC and the AP has been installed.

Ping command for take a look at a connection

Configure A DHCP Wireless Access Point (TP-LINK TL-WA500G)

when the pc configuration has completed, now you must configure your Wireless Access Point. This manual will display the way to configure your Access Point via the web-based management page. You can also use Internet Explorer, Mozilla Firefox or Google Chrome. Now observe this manual :

Log in to your Wireless Access point. Open your web browser, and Type //192.168.1.254 inside the address area of web browser and press Enter.
type Ip deal with at the address bar
Enter admin for the User Name and Password (each in decrease case letters) shown under Then click OK or press Enter.
Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.
Now, Select Wireless > Basic Settings it will allow you to configure the basic settings on your wi-fi community, and you could give your SSID name here.
Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.
Then, select Wireless > Wireless Mode will permit you to installation the wireless mode on your wireless community suitable to your desires.
Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.
Next select Wireless > Security Settings it's going to allow you to configure wireless safety for your wi-fi community to protect your records from intruders. The AP presents three safety sorts: WEP, WPA/WPA2, and WPA-PSK/WPA2-PSK.
Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.
Next, select DHCP > DHCP Settings it will enable you to set up the AP as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PCs which are related to the gadget on the LAN.
Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.
For the closing step, you need to enable Dynamic IP (DHCP) on The Network choice of LAN.
Set Up TP-Link (TL-WA500G) As DHCP Wireless Access Point.
And now you need to reboot your Wireless Access Point to take consequences of your exchange.
Finish.