How to create Array and Logical Drive using HP Smart Storage Administrator SSA Terbaru 2019

How to create Array and Logical Drive the use of HP Smart Storage Administrator (SSA)

Create Array and Logical Drive. This guide is part of putting in Windows Server 2012 R2 on HP Proliant ML10 v2 server. To keep your Windows running machine report on HP Proliant ML10 v2 server you should create an Array and Logical Drive. Therefore we need to installation the force mounted in this server. For a beginner server consumer maybe it makes so confused and complicated to do this undertaking. But we are able to explain this mission by the simple manner so that you can comply with my guide to developing Array and Logical Drive using HP Smart Storage Administrator (SSA). 

We want this software (HP Smart Storage Administrator) SAA to configuring array and create the logical force, you may download this software program manually from authentic Hewlett Packard internet site or you can get this software program covered on HP Service Pack for Proliant software. All software is ISO photo, so that you must burn it into DVD or USB flash disk before the use of this software. If you have not created any logical pressure on HP Proliant ML10 v2 server, you will see 0 Logical volume at HP Dynamic Smart Array B120i RAID controller at pre booting display screen shown at the image beneath.

HP Proliant ML10 v2 server - logical drive

Now, comply with our manual carefully to create Array and Logical Drive the use of HP Smart Storage Administrator (SSA). 

Prerequisites.

1. DVD media or USB Flash disk.
2. You have to download HP Service Pack for Proliant or SPP. 
   This is a massive document, for the present day model (2015.10.0) has 5.12 GB length. (recommended)
3. For an opportunity, you could down load simplest Offline HP Smart Storage Administrator (HP SSA) 346 MB Here  
4. Once down load whole, transfer this report to USB flash disk, and make it bootable stick.
5. You can read this guide to make Bootable USB flash disk using the HP USB key application for windows.

Guide to create Array and Logical Drive.

1. Make sure you have got modified boot order on HP Proliant ML10 v2 server, besides from USB flash disk.
2. Once your server boot up to load your flash disk, you'll see two alternatives must you choose.
   

• Automatic Firmware Update Version 2015.10..0
• Interactive Firmware Update Version 2015.10.0 

Now you must pick out Interactive Firmware Update Version 2015.10.0 than input.wait for this system to load.

HP carrier PAck ProLiant - load program

Then you will see this in your screen.

HP carrier PAck ProLiant - load program

Now software will ask to select your language, through default it in English. Then click on on on Accept to take delivery of the End User License Agreement (EULA)

EULA - select language

Then click on next to maintain.

HP provider PAck ProLiant

Then you may see this photograph to your display, to begin to create Array and Logical Drive using HP Smart Storage Administrator (SSA), you have to click on on HP Smart Storage Administrator (SSA). This will configure, manipulate, and analysis for HP Smart array and storage works.

HP Smart Storage Administrator (SSA)

Now, anticipate this system to load HP smart storage.

HP Smart Storage Administrator (SSA)

Now, you may enter the HP Smart Storage Welcome display screen. On this display, you must click on Dynamic Smart Array B120i RAID under Array Controller.

Dynamic Smart Array B120i RAID beneath Array Controller.

Then click on Configure.Dynamic Smart Array B120i RAID - configureNow, click on Create Array.Dynamic Smart Array B120i RAID - create an arrayNow, select physical drives for the new Array.

Dynamic Smart Array B120i RAID - select physical drives

Then you don't want to change any choice on the next display screen, simply click on create a logical force.Dynamic Smart Array B120i RAID - create a logical driveOn the following screen you will be asked to preserve, Are you certain you need to keep? Just click on yes.Dynamic Smart Array B120i RAID - create a logical driveOnce your process finished, now you will see a message on display: Logical power turned into effectively created, Please choose one of the actions beneath. Now click on Finish.Dynamic Smart Array B120i RAID - create a logical driveOnce end, now you may see your logical drives below controller device.Dynamic Smart Array B120i RAID - controller deviceFinish, you've got created Array and Logical Drive the use of HP Smart Storage Administrator (SSA). Now you can near this window.logical quantity now created

logical quantity now created