How to Flash / Install Firmware Samsung GALAXY S7 Using ODIN v3.11.1 Terbaru 2019

How to Flash / Install Firmware Samsung GALAXY S7 Using ODIN v3.11.1..

Flash Stock Firmware Samsung Galaxy S7. If you want to upgrade your Samsung Galaxy S7 firmware, we recommend the use of Samsung’s own utilities OTA (Over-the-air) or Samsung Kies. Comply with this manual handiest if you recognize about dangers worried in flashing your Samsung Galaxy S7 device. On this guide, we flash a Samsung device the usage of ODIN v3.11.1.
This tool is launched in 2016, March. Samsung Galaxy S7 is the cellphone with 5,1 Inch Super AMOLED capacitive touchscreen, 16M shades, work on Android OS, v6.0 (Marshmallow), Supported with Quad-core (2x2.15 GHz Kryo & 2x1.6 GHz Kryo) CPU, Qualcomm MSM8996 Snapdragon 820 chipset, Adreno 530 GPU, blended with 4000 MB of RAM and 12 MP of  Main digital camera and 5 MP on secondary camera. 

Preparation.

Below are the subsequent things you must do before flashing your Android Samsung Smartphone tool.

1. Make sure your Samsung Galaxy S7 is completely charged. Or minimal has 88 % of battery potential. It will keep away from the flashing process failure.
2. Flashing technique will delete or wipe all statistics stored in internal memory. So, do not forget to backup all facts earlier than flashing tool.
3. Make sure you have mounted a cutting-edge of the Samsung driver, that guide together with your device If you don't have, you could download here 
4. Original USB cable driver for your Samsung Galaxy S7.
5. Download Odin V3.11.1, Here 
6. Download Official firmware report for the model variety of your device, down load it from - SamMobile, or you can go to samsung-updates.com/
7. Or you could examine Guide How to Download Official Samsung Firmware From SamMobile. Here
8. Firmware Samsung Galaxy S7, you need to Log In to download firmware via this link.

• SM-G930F (GALAXY S7) - Global. Here 
• SM-G930FD - Southeast Asia Here 
• SM-G930T - T-Mobile. Here. 

Guide To Flash Samsung GALAXY S7 

1. You need to download all necessary record. (Samsung USB driver and Odin)
2. Then, installation all driver to your computer or PC.
3. Extract Odin V3.11.1. Report within the vacation spot folder.
4. Switch Off your Samsung Galaxy S7 to begin flashing system.
5. Then, run Odin3 v3.11.1 via right click on on Odin.exe and choose Run as Administrator.Flash Stock Firmware On Samsung GALAXY S7
6. When the program is strolling, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware report. 
7. Now your firmware report has been inserted in Odin3  
8. Then, Enter download mode your Samsung Galaxy S7. See this guide how to do it.
9. On this mode, now connect your Samsung Galaxy S7 to your PC / pc the use of a USB cable. 
10. After your smartphone connected, you will see a message appear that display your tool delivered and there may be data at the ID: COM at pinnacle left corner. Keep in mind for this COM vary relying on the PC / Laptop. Just Ignore all, in this photograph you will see that your device is detected on (COM 5)

    Port Com Samsung GALAXY S7

11. Make positive re-partition is NOT ticked
12. When the entirety already you could click on Start Button. at the lowest left corner
13. Just look ahead to the technique to run about 2-5 minutes, and make certain there's no interference in this manner. 
14. When whole it'll display a notification PASS and your telephone Samsung Galaxy S7 will robotically restart.
15. Wait to your device in addition up, it will take some time.
16. When your Samsung Galaxy S7 is geared up to apply, now test your firmware model. See this guide how to test it. 
17. Finish.