How to Flash Lenovo Vibe K5 Plus Back to Stock Using QFIL Terbaru 2019

How to Flash Lenovo Vibe K5 Plus Back to Stock Using QFIL.

Flash Lenovo Vibe K5 Plus. If you've got failed flashed your Lenovo Vibe K5 Plus, you can flash this device again to stock the usage of this approach below. If you flashing again the inventory ROM this could enables you solve any problems which you might be dealing with along with your current ROM. This manual work at the Qualcomm Snapdragon-based totally tool handiest. So, in case your device uses Mediatek chipset you want a specific approach. And this guide desires a tool known as QFIL (Qualcomm Flashing Tool).

Before we perform flashing this tool, permit's we realize a element specs of Lenovo Vibe K5 Plus, this device Released 2016, April, has 5.0 inches IPS capacitive touchscreen, 16M colorations, run on Android OS, v5.1 (Lollipop), Powered by  Octa-center (4x1.5 GHz Cortex-A53 & 4x1.2 GHz Cortex-A53) CPU, Qualcomm MSM8939v2 Snapdragon 616 chipset. Supported with 2 GB of RAM, 13 MP of primary digicam, and 5 MP on secondary camera. And this tool Is Also referred to as Lenovo A6020a46, Lenovo Lemon 3.

Thanks for Hnk1
 @xda discussion board for this manual. Now, permit we begin this manual.

Pre Requisites.

1. QPST (Download Qualcomm Product Support Tools) Here.
2. vcredist_x86.zip Here 
3. Driver Lenovo Vibe K5 Plus. Here  
4. Stock ROM Lenovo Vibe K5 Plus (Lenovo A6020a46) Here.

(Make sure you select the right file for your Lenovo Vibe K5 Plus or it'll hard brick your device)

Enable USB Debugging.

1. Activate the Developer options for your Lenovo Vibe K5 Plus device.

• Go to Settings
• About phone
• Device Information
• Then faucet 7 instances on Build wide variety.

Enable USB debugging 

• Go to Settings - Developer Option - USB Debugging

Then, Enable OEM unencumber Settings - Developer - Unlock OEMFinish.

Flashing Guide, QFIL Method.

There are many exceptional strategies to flash or installation firmware on Lenovo Vibe K5 Plus. If you have a custom restoration or simplest fastboot you could use the TWRP Method, however if you may boot your tool into download mode you can use this manual (QFIL Method). Now observe this manual below to start flashing your Lenovo Vibe K5 Plus.

1. Make sure you have got correctly downloaded the stock image for your Lenovo Vibe K5 Plus.
2. Then install QPST software program. You can want to install Microsoft Visual C++ 2010 Runtime Libraries (x86), which can be furnished within the attachment for QPST to paintings.
3. Make sure all driving force set up efficaciously.
4. Now, extract your Stock or Firmware in a specific pressure to your laptop folder. For easy get entry to extract it on C:stock
5. Now open QFIL application from the begin menu. Just kind qfil at search packages and files form, then click on the end result display below programs.
6. Then, flip off your AndroidLenovo Vibe K5 Plus.
7. Now, input your Lenovo Vibe K5 Plus into down load mode. You may do it by way of  :

• Press the Volume Up button and keep retaining it at the same time as connecting it to the computer/pc the use of the USB cable. 

Lenovo Vibe K5 Plus will vibrate one time, and you will see a black screen.on your pc/pc, you may see under Device Manager > Qualcomm Lenovo HS-USB QDLoader 9008.Open device supervisor to your pc, There ought to be a tool called

•  Qualcomm HS-USB QDLoader 9008 (COMXX)flash Lenovo Vibe K5 Plus - Qualcomm HS-USB QDLoader 9008 

Now Run software QFIL to your pc.in the Programmer, course specifies the route to the record prog_emmc_firehose_8916.mbn for this click browse. Then on the Select Build search route to the folder with the firmware by click on on Browse button. In this situation, we use document extracted from S60-a_S227_150806_ROW-QPST-QFILThen Select document application (ex : prog_emmc_firehose_89XX. Mbn) and click on open.flash Lenovo Vibe K5 Plus the use of QFIL tool.Then click at the Load XML …in the window that opens, select one after the other – 

• For example 
• first rawprogram0.xml 
• click “Open” 
• then patch0.xml 
• also, click “Open.”

Make sure all inputs are correct and click Download under Load XML button.now anticipate the manner to run about 5 to 10 minutes:The Lenovo Vibe K5 Plus device must restart the technique of filling within the a success firmware and boot into Android OS.warning, on the primary boot your Lenovo Vibe K5 Plus will take about up to fifteen mins. So, do not worry approximately itFinish.