[Tested] How To Root LG G Flex 2 Latest Update

   At this publish, I'll provide you with two ways to do Rooting for your LG tool. How to cohesion would seem easy as it will use the Tool LG_One_Click_Root made by way of avicohh are dedicated simplest to the LG and the second one manner to apply equipment which encompass more than one documents like (busybox and UPDATE-SuperSU.zip).

   Rooting is truely to carry out the android device, not most effective on the tool on this post who can do it, however it is still a whole lot greater to do, like RootGenius, iRoot, MobileGo, Kingoroot, KingRoot, One Click Root, SRSRoot and other tools.

    In the tools I referred to above will want a PC to a place they ran, in case you do not have a PC, you can use How Root Without a PC using the utility KingRoot Mobile, RootGenius Mobile, iRoot Mobile, 360Root Mobile, Kingoroot Mobile, Key Master Root, TowelRoot, FramaRoot, and other applications.

  Okay, now returned to the topic of debate, to rooting on your LG tool, please do the steps as follows:

HOW TO ONE

Devices showed running with root method (If your tool isn't always listed it is most probable nonetheless supported) 

• LG F60 (all editions)
• LG Tribute (all variants)
• LG G2 (all variants)
• LG MS395/D393
• LG G3 (all versions)
• LG L90 (all variations)
• LG Transpyre
• LG Volt (LS740)
• LG G Flex 2

NOTE: Do not try this on devices with 5.1.1 , on the time this approach turned into posted it labored on many firmware 5.0.2 and underneath. Please confirm if the tool you are successful within the root.

• On your LG Android Device, permit USB Debugging mode.
• Download and set up LG Android USB drivers in your pc.
• Download and extract the report LG-Root-Tools in your pc.

(If you need to renew SuperSU report, you can get it here.)

• After that, join your Android tool to the laptop using a USB cable.

• In the LG-Root folder-Tools, open a Command Prompt, how to press the Shift key and right click, then pick out "Open command window here"

• To make sure your Android tool is connected to the computer, kind the command: adb.exe devices

(if there is a listing of gadgets appears, it way your Android tool is connected to a pc)

• Now, you need to enter multiple documents (busybox, lg_root.sh, and UPDATE-SuperSU-v2.46.zip) on your Android device. Do I give this command at a command prompt:

adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

• To continue, your Android tool want to boot into Download Mode, supply this command into the command spark off: adb.exe reboot bootloader

(The command will convey your Android tool into Fastboot Mode / Download and look ahead to the drivers installed)

• Once you are at the Android device Download Mode, now double click on ports.bat (This will provide us what number of devices connected COM port), Command activate window will seem and locate any range of COM ports.

• If you understand what COM port your tool is, please close the Command Prompt ports.bat.
• Back to previous command prompt window and trouble the command: 

Send_Command.exe \.com4

(Note: COM4 is the port you are)

• Lastly, if the commands above is going well, then now difficulty the command: 

sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox

• After that, cast off the battery to exit the Download Mode, or through typing the command: fastboot reboot
• Now you may see SuperSU application on your android device application menu.

BOTH WAYS

Devices confirmed working with this technique (If your device is not indexed it is most in all likelihood still supported)

• LG G3 (all versions)
• LG G3 Beat
• LG G2
• LG G2 Mini
• LG G Pro 2
• LG G Pad
• LG F60
• LG L90
• LG Tribute
• LG Spirit
• LG Volt
• LG G Vista

  This method the usage of a tool made in particular for Rooting the device LG, his name is LG_One_Click_Root by way of avicohh, this tool works on Android 4.4.X Kitkat, 5.xx Lollipop, and also will be developed for Android 6.xx Marshmallow.

• Download and Install LG USB Driver for your computer, if you do now not do it.
• Download file LG_One_Click_Root (then double-click to extract) in your computer.
• On your Android Device, enable USB Debugging Mode, Go to Settings > About Phone > Software Information and faucet build number until you are presented with "You are actually a developer" Exit returned to Settings major display screen. In Developer Options enable USB Debugging (Some devices require permitting PTP for debugging to work)
• After that, join your Android tool to the laptop using a USB cable.

(make certain your Android device is virtually related to a laptop)

• After that, double-click on the record and wait LG_One_Click_Root.exe rooting method is finished.

• Now you'll see SuperSU application on your android device software menu.

Resolving Problems

1. If the smartphone no longer understand, try to switch among MTP and PTP alternatives.
2. If you purchased "MSVCR100.dll is lacking" errors, set up Visual C++ Redistributable.

(64 bit users, also install this file and not the 64bit model)

//forum.xda-developers.com/android/development/manual-root-technique-lg-devices-t3049772
//discussion board.xda-developers.com/lg-g3/standard/guide-root-lg-firmwares-kitkat-lollipop-t3056951

Don't Miss it!

• How To Root Lg G Flex 2 Without Computer
• How To Root Lg G Flex 2
• How To Root Lg G Flex 2 5.1.1
• How To Root Lg G Flex 2 G2 G3 On Lollipop
• Root Lg G Flex 2 Ls996
• Kingo Root Lg G Flex 2
• Root Lg G Flex 2 Android 6
• Root Lg G Flex 2 6.0.1
• Root Lg G Flex 2 Marshmallow
• Root Lg G Flex 2 Android 5.1.1