Dus box maxtron diamond new |
Adapun maxtron diamond bootloop cara hard resetnya boleh via recovery-nya bisa dicoba dengan tombol kombinasi berikut : power volume atas, power volume bawah, power dua volume, power home volume. Apabila masih gagal, silakan lanjut flash saja.
Pastikan bentuk kesing belakang serta tabrakan pena pada stiker sama |
Cara flash maxtron contoh diamond new dapat kita gunakan research download saja, sebab chipsetnya spreadtrum, serta pastikan driver telah kita instal sebelumnya.
Flash maxtron diamond spd sebagai berikut :
- Buka research download dulu (pake versi 4xx) saja
- Load packet
- Ambil file PAC nya
- Masuk ke settingbackup, hilangkan semua centang atas dan bawah, namun apabila nir disetting nir apa-apa, hanya kadang kuat dalam imei saja
- Klik start downloading
- Tekan tombol boot (volume atas, atau volume bawah) dan lanjut colok usb, jikalau sehabis terdeteksi driver tidak jalan, tekan stop lanjut ulangi.
Firmware maxtron diamond spd ini output backup dari hape baru, sengaja kita ambil yg baru, masih segel lanjut kita backup.
Aplikasi baku bawaan diamond spd new |
Pastikan versinya sama, karena setau saya terdapat beberapa versi build-nya. Apabila setelah flash LCD blank, silakan pelajari solusi lcd bergaris serta blank maxtron diamond new spd setelah flash.
Nomor bentukan joelzr.com_Z2_KW_YPE_M509_MAXTRON_QHD_V1.0_6.0_20170227 |
Device Brand : SPRD
Device Model : sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
Device CPU : sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
Device IntName : sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
Device Version : 6.0
Device Compile : 27/02/2017 6:53:52
Device Project : MRA58K release-keys
Device ExtInfo : MAXTRON-DIAMOND
Card found: S/N : 63B4EF67 , v0136
Chinese Miracle II [SPD module] v 1.26
Set mode to : SP [SC773x] eMMC [Android 6.X]
Operation : Read FullFlash [ v1.26 ]
1. Remove battery. Insert battery back
dua. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 3 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )
Reconnect Power/Cable!
Operation : Read FullFlash [ v1.26 ]
1. Remove battery. Insert battery back
dua. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 3 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )
Reconnect Power/Cable!
Operation : Read FullFlash [ v1.26 ]
1. Remove battery. Insert battery back
dua. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
Model Brand : SPRD
Model Device: sp7731c_1h10_32v4_ypr_qhd_m509_maxtron
AndrVersion : 6.0
BaseBand CPU: SP7731C_1H10_32V4_YPR_QHD_M509_MAXTRON
Project Ver : MRA58K release-keys
Model Ext : MAXTRON-DIAMOND
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1600 MiB
Saved to : C:UsersjoelzrDocumentsMaxtron Diamond NewSP7731C_1H10_32V4_YPR_QHD_M509_MAXTRON_sp7731c_1h10_32v4_ypr_qhd_m509_maxtron_6.0_MRA58K_release-keys_MAXTRON-DIAMOND
Done!
Elapsed: 00:10:37
Reconnect Power/Cable!
Firmware Maxtron Diamond New SPD
Mahar Pulsa 25.000,- ke angka 0852 61020 345
Silakan konfirmasi password via SMS/WA
Khusus pengguna selain telkomsel,harus via WA
karena akibat SMS umumnya pending sampe lima menit
Khusus pengguna selain telkomsel,harus via WA
karena akibat SMS umumnya pending sampe lima menit
Or via paypal $3 (tiga dollar)
WA : +6285261020345
Email : pariscell@gmail.com
------------------------------------------------------------------------
------------------------------------------------------------------------
Catatan : Di dus box tertulis system android lima.0
_______ Silakan biarkan, sebab system android berdasarkan pada hapenya yaitu 6.0
Berikan Komentar
<i>KODE</i>
<em>KODE YANG LEBIH PANJANG</em>
Notify me
untuk mendapatkan notifikasi balasan komentar melalui Email.