[Tested] How To Root LG F70 Latest Update

   At this post, I'll come up with two approaches to do Rooting in your LG tool. How to cohesion might seem clean because it will use the Tool LG_One_Click_Root made through avicohh are dedicated only to the LG and the second manner to apply tools which encompass more than one documents like (busybox and UPDATE-SuperSU.zip).

   Rooting is genuinely to perform the android device, now not only on the device on this publish who can do it, however it's nonetheless a lot extra to do, like RootGenius, iRoot, MobileGo, Kingoroot, KingRoot, One Click Root, SRSRoot and other tools.

    In the equipment I referred to above will need a PC to an area they ran, if you do not have a PC, you could use How Root Without a PC the usage of the application KingRoot Mobile, RootGenius Mobile, iRoot Mobile, 360Root Mobile, Kingoroot Mobile, Key Master Root, TowelRoot, FramaRoot, and other applications.

  Okay, now again to the subject of discussion, to rooting on your LG tool, please do the steps as follows:

HOW TO ONE

Devices confirmed operating with root technique (If your device isn't always indexed it is most possibly still supported) 

• LG F60 (all variants)
• LG Tribute (all variations)
• LG G2 (all variations)
• LG MS395/D393
• LG G3 (all versions)
• LG L90 (all variants)
• LG Transpyre
• LG Volt (LS740)
• LG G Flex 2

NOTE: Do now not try this on gadgets with 5.1.1 , on the time this technique changed into posted it worked on many firmware 5.0.2 and underneath. Please confirm if the tool you're a success within the root.

• On your LG Android Device, enable USB Debugging mode.
• Download and installation LG Android USB drivers for your pc.
• Download and extract the report LG-Root-Tools for your pc.

(If you need to resume SuperSU report, you can get it here.)

• After that, join your Android device to the laptop the usage of a USB cable.

• In the LG-Root folder-Tools, open a Command Prompt, the way to press the Shift key and right click, then select "Open command window here"

• To make certain your Android tool is hooked up to the laptop, type the command: adb.exe devices

(if there may be a listing of gadgets seems, it means your Android device is connected to a pc)

• Now, you want to go into multiple documents (busybox, lg_root.sh, and UPDATE-SuperSU-v2.46.zip) on your Android device. Do I give this command at a command spark off:

adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

• To continue, your Android device want to boot into Download Mode, supply this command into the command spark off: adb.exe reboot bootloader

(The command will convey your Android tool into Fastboot Mode / Download and anticipate the drivers hooked up)

• Once you're on the Android tool Download Mode, now double click on ports.bat (This will provide us how many devices linked COM port), Command prompt window will seem and discover any range of COM ports.

• If you understand what COM port your device is, please close the Command Prompt ports.bat.
• Back to previous command activate window and issue the command: 

Send_Command.exe \.com4

(Note: COM4 is the port you are)

• Lastly, if the commands above goes properly, then now problem the command: 

sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox

• After that, remove the battery to exit the Download Mode, or through typing the command: fastboot reboot
• Now you may see SuperSU application for your android device utility menu.

BOTH WAYS

Devices confirmed running with this method (If your device isn't listed it's maximum probable nonetheless supported)

• LG G3 (all versions)
• LG G3 Beat
• LG G2
• LG G2 Mini
• LG G Pro 2
• LG G Pad
• LG F60
• LG L90
• LG Tribute
• LG Spirit
• LG Volt
• LG G Vista

  This technique using a tool made specifically for Rooting the tool LG, his name is LG_One_Click_Root via avicohh, this tool works on Android 4.4.X Kitkat, 5.xx Lollipop, and will also be advanced for Android 6.xx Marshmallow.

• Download and Install LG USB Driver for your pc, in case you do not do it.
• Download record LG_One_Click_Root (then double-click on to extract) on your computer.
• On your Android Device, allow USB Debugging Mode, Go to Settings > About Phone > Software Information and tap build number until you're provided with "You at the moment are a developer" Exit back to Settings principal display. In Developer Options enable USB Debugging (Some gadgets require enabling PTP for debugging to paintings)
• After that, join your Android device to the laptop the usage of a USB cable.

(make sure your Android device is surely related to a computer)

• After that, double-click on the record and wait LG_One_Click_Root.exe rooting system is finished.

• Now you may see SuperSU application for your android tool software menu.

Resolving Problems

1. If the smartphone not recognize, try to switch among MTP and PTP alternatives.
2. If you purchased "MSVCR100.dll is missing" mistakes, set up Visual C++ Redistributable.

(64 bit users, also install this record and not the 64bit version)

//discussion board.xda-builders.com/android/improvement/manual-root-approach-lg-devices-t3049772
//discussion board.xda-developers.com/lg-g3/standard/manual-root-lg-firmwares-kitkat-lollipop-t3056951

Don't Miss it!

• How To Root Lg-f700l
• How To Root Lg G5 F700k
• How To Root Lg G5 F700s