At this post, I'll come up with two approaches to do Rooting on your LG device. How to team spirit could appear clean as it will use the Tool LG_One_Click_Root made by using avicohh are committed best to the LG and the second one way to apply tools which encompass multiple documents like (busybox and UPDATE-SuperSU.zip).
Rooting is without a doubt to carry out the android device, now not most effective at the tool on this put up who can do it, but it's nonetheless tons more to do, like RootGenius, iRoot, MobileGo, Kingoroot, KingRoot, One Click Root, SRSRoot and other tools.
In the gear I mentioned above will need a PC to an area they ran, in case you do not have a PC, you can use How Root Without a PC using the software KingRoot Mobile, RootGenius Mobile, iRoot Mobile, 360Root Mobile, Kingoroot Mobile, Key Master Root, TowelRoot, FramaRoot, and other applications.
Okay, now back to the topic of discussion, to rooting on your LG tool, please do the steps as follows:
HOW TO ONE
Devices showed working with root approach (If your tool isn't always listed it is maximum probable nonetheless supported)
- LG F60 (all versions)
- LG Tribute (all versions)
- LG G2 (all variations)
- LG MS395/D393
- LG G3 (all variants)
- LG L90 (all versions)
- LG Transpyre
- LG Volt (LS740)
- LG G Flex 2
NOTE: Do no longer attempt this on gadgets with 5.1.1 , at the time this technique was published it worked on many firmware 5.0.2 and beneath. Please confirm if the device you're successful in the root.
- On your LG Android Device, permit USB Debugging mode.
- Download and deploy LG Android USB drivers in your laptop.
- Download and extract the report LG-Root-Tools in your laptop.
(If you need to resume SuperSU file, you may get it here.)
- After that, connect your Android tool to the laptop the use of a USB cable.
- In the LG-Root folder-Tools, open a Command Prompt, how to press the Shift key and right click, then pick out "Open command window here"
- To make sure your Android tool is hooked up to the computer, kind the command: adb.exe devices
- Now, you need to go into more than one files (busybox, lg_root.sh, and UPDATE-SuperSU-v2.46.zip) on your Android device. Do I deliver this command at a command prompt:
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp
- To maintain, your Android tool want besides into Download Mode, provide this command into the command activate: adb.exe reboot bootloader
- Once you're on the Android tool Download Mode, now double click on ports.bat (This will provide us how many devices related COM port), Command spark off window will appear and locate any wide variety of COM ports.
- If you understand what COM port your tool is, please close the Command Prompt ports.bat.
- Back to preceding command set off window and difficulty the command:
Send_Command.exe \.com4
(Note: COM4 is the port you are)
- Lastly, if the commands above is going well, then now issue the command:
sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox
- After that, take away the battery to exit the Download Mode, or by means of typing the command: fastboot reboot
- Now you will see SuperSU application for your android device utility menu.
BOTH WAYS
Devices showed working with this approach (If your tool is not listed it is maximum probable still supported)
- LG G3 (all variants)
- LG G3 Beat
- LG G2
- LG G2 Mini
- LG G Pro 2
- LG G Pad
- LG F60
- LG L90
- LG Tribute
- LG Spirit
- LG Volt
- LG G Vista
This method the use of a tool made in particular for Rooting the device LG, his call is LG_One_Click_Root via avicohh, this device works on Android 4.4.X Kitkat, 5.xx Lollipop, and will also be evolved for Android 6.xx Marshmallow.
- Download and Install LG USB Driver on your pc, if you do now not do it.
- Download report LG_One_Click_Root (then double-click to extract) for your computer.
- On your Android Device, allow USB Debugging Mode, Go to Settings > About Phone > Software Information and faucet build number till you're supplied with "You at the moment are a developer" Exit lower back to Settings foremost screen. In Developer Options enable USB Debugging (Some gadgets require allowing PTP for debugging to work)
- After that, connect your Android tool to the laptop the use of a USB cable.
(make certain your Android device is definitely linked to a pc)
- After that, double-click on the report and wait LG_One_Click_Root.exe rooting system is finished.
- Now you will see SuperSU application for your android tool application menu.
Resolving Problems
- If the telephone now not understand, try and transfer among MTP and PTP alternatives.
- If you acquire "MSVCR100.dll is lacking" blunders, deploy Visual C++ Redistributable.
(64 bit users, also install this report and not the 64bit version)
//forum.xda-developers.com/android/development/guide-root-technique-lg-gadgets-t3049772
//forum.xda-builders.com/lg-g3/fashionable/guide-root-lg-firmwares-kitkat-lollipop-t3056951
Berikan Komentar
<i>KODE</i>
<em>KODE YANG LEBIH PANJANG</em>
Notify me
untuk mendapatkan notifikasi balasan komentar melalui Email.