[Tested] How To Root LG G Vista Latest Update

   At this put up, I'll give you two methods to do Rooting in your LG device. How to solidarity might seem easy as it will use the Tool LG_One_Click_Root made by means of avicohh are devoted only to the LG and the second one way to use tools which encompass multiple documents like (busybox and UPDATE-SuperSU.zip).

   Rooting is definitely to perform the android tool, now not handiest on the device in this publish who can do it, but it's still plenty greater to do, like RootGenius, iRoot, MobileGo, Kingoroot, KingRoot, One Click Root, SRSRoot and different gear.

    In the equipment I mentioned above will need a PC to an area they ran, in case you do no longer have a PC, you may use How Root Without a PC using the utility KingRoot Mobile, RootGenius Mobile, iRoot Mobile, 360Root Mobile, Kingoroot Mobile, Key Master Root, TowelRoot, FramaRoot, and other packages.

  Okay, now lower back to the subject of dialogue, to rooting for your LG tool, please do the steps as follows:

HOW TO ONE

Devices confirmed running with root technique (If your device isn't indexed it is maximum probable nevertheless supported) 

• LG F60 (all versions)
• LG Tribute (all versions)
• LG G2 (all editions)
• LG MS395/D393
• LG G3 (all variations)
• LG L90 (all variants)
• LG Transpyre
• LG Volt (LS740)
• LG G Flex 2

NOTE: Do now not strive this on devices with 5.1.1 , at the time this approach became posted it labored on many firmware 5.0.2 and underneath. Please confirm if the tool you are a success in the root.

• On your LG Android Device, permit USB Debugging mode.
• Download and installation LG Android USB drivers to your computer.
• Download and extract the report LG-Root-Tools to your computer.

(If you need to renew SuperSU report, you may get it here.)

• After that, connect your Android device to the computer the usage of a USB cable.

• In the LG-Root folder-Tools, open a Command Prompt, how to press the Shift key and right click, then select "Open command window here"

• To ensure your Android tool is hooked up to the pc, kind the command: adb.exe devices

(if there is a listing of devices seems, it method your Android tool is hooked up to a computer)

• Now, you need to enter more than one documents (busybox, lg_root.sh, and UPDATE-SuperSU-v2.46.zip) to your Android device. Do I give this command at a command spark off:

adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp

• To hold, your Android tool want to boot into Download Mode, deliver this command into the command spark off: adb.exe reboot bootloader

(The command will deliver your Android device into Fastboot Mode / Download and watch for the drivers established)

• Once you're at the Android tool Download Mode, now double click on ports.bat (This will provide us what number of devices connected COM port), Command prompt window will appear and stumble on any wide variety of COM ports.

• If you understand what COM port your tool is, please close the Command Prompt ports.bat.
• Back to preceding command prompt window and problem the command: 

Send_Command.exe \.com4

(Note: COM4 is the port you are)

• Lastly, if the commands above goes nicely, then now issue the command: 

sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox

• After that, put off the battery to exit the Download Mode, or by typing the command: fastboot reboot
• Now you'll see SuperSU application for your android device utility menu.

BOTH WAYS

Devices showed running with this technique (If your device isn't listed it is most probably still supported)

• LG G3 (all variations)
• LG G3 Beat
• LG G2
• LG G2 Mini
• LG G Pro 2
• LG G Pad
• LG F60
• LG L90
• LG Tribute
• LG Spirit
• LG Volt
• LG G Vista

  This method the use of a tool made especially for Rooting the device LG, his call is LG_One_Click_Root by using avicohh, this tool works on Android 4.4.X Kitkat, 5.xx Lollipop, and will also be developed for Android 6.xx Marshmallow.

• Download and Install LG USB Driver for your laptop, if you do not do it.
• Download report LG_One_Click_Root (then double-click on to extract) to your pc.
• On your Android Device, permit USB Debugging Mode, Go to Settings > About Phone > Software Information and faucet build number until you are supplied with "You are actually a developer" Exit again to Settings main screen. In Developer Options enable USB Debugging (Some devices require enabling PTP for debugging to work)
• After that, connect your Android device to the computer the usage of a USB cable.

(make certain your Android device is clearly connected to a laptop)

• After that, double-click on the report and wait LG_One_Click_Root.exe rooting procedure is finished.

• Now you may see SuperSU application in your android device application menu.

Resolving Problems

1. If the phone now not understand, try and switch among MTP and PTP options.
2. If to procure "MSVCR100.dll is missing" blunders, install Visual C++ Redistributable.

(64 bit users, also install this report and not the 64bit version)

//forum.xda-builders.com/android/improvement/manual-root-method-lg-gadgets-t3049772
//discussion board.xda-developers.com/lg-g3/preferred/manual-root-lg-firmwares-kitkat-lollipop-t3056951

Don't Miss it!

• How To Root Lg G Vista
• How To Root Lg G Vista 2
• How To Root Lg G Vista Verizon
• Root Lg G Vista Vs880 Without Computer
• Root Lg G Vista Without Computer
• Root Lg G Vista Vs880
• Root Lg G Vista 5.1.1