[Tested] SOLVED G920F Odin flash error hidden. img FAIL Samsung Galaxy S6 Update Terbaru

[SOLVED] G920F Odin flash error hidden. img FAIL Samsung Galaxy S6
Samsung G920F Error hidden.img fail
I tried flashing 6.0.1 to my G920I and got the big red FAIL notification...
Turns out it was due to the "hidden.img" arsip, inside of the downloaded tar.md5 file:
I came across several tutorials suggesting you should delete the "hidden.img" arsip from the main image arsip, and re-flash the entire image arsip, but that is unnecessary.
This method flashes the "hidden.img" image arsip only, so the entire process takes just a few minutes, and the flashing process alone takes just a few seconds.
The fix to this issue follow these steps:
  1. Remove the .md5 extension from the arsip name so that it ends with .tar only.
  2. Extract the .tar arsip to its own folder (I recommend 7zip).
  3. Locate the "hidden.img" file.
  4. Rename the "hidden.img" file by adding a ".tar" to it, so that you get "hidden.img.tar".
  5. Get your phone back into download mode:
Reboot it directly into download mode by pressing the volume up + home + power buttons for a few seconds. If that doesn't work (such as in my case - it boots into the error message over and over again) then reboot the device by pressing volume up + volume down + power buttons (without the home button) for a few seconds. When it shuts down quickly press the volume down + home + power buttons to enter download mode.
Reset Odin, and connect the USB cable back into your phone. Odin should display "Added!!".click AP and select the "hidden.img.tar" file you renamed before.click Start.let the device reboot itself a couple of times, and you're done.
LOG ODIN :

[SOLVED] G920F Odin flash error hidden. img FAIL Samsung Galaxy S6

[Tested] SOLVED G920F Odin flash error hidden. img FAIL Samsung Galaxy S6 Update TerbaruSamsung G920F Error hidden.img fail I tried flashing 6.0.1 to my G920I and got the big red FAIL notification... Turns out it was due to the...

Artikel Terkait

Berikan Komentar

  1. Untuk menulis kode gunakan <i>KODE</i>
  2. Untuk menyisipkan kode ke dalam Syntax Highlighter gunakan <em>KODE YANG LEBIH PANJANG</em>
  3. Kode harus di-parse terlebih dulu agar bisa ditulis.
  4. Centang Notify me untuk mendapatkan notifikasi balasan komentar melalui Email.
histats